Local 2026 Pricing · Chino Valley, AZ

Chino Valley, AZ Well Drilling Cost

Avg. Depth

280 ft

Cost / Foot

$30–$68

Total Project

$12,600

vs. National Avg

68% above avg.

the $7,500 national avg.

Chino Valley, AZ Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $3,000–$6,800 $7,800–$11,600 $9,300
150 ft $4,500–$10,200 $9,700–$15,400 $11,950
200 ft $6,000–$13,600 $11,600–$19,200 $14,600
300 ft $9,000–$20,400 $15,400–$26,800 $19,900
400 ft $12,000–$27,200 $19,200–$34,400 $25,200
500 ft $15,000–$34,000 $23,000–$42,000 $30,500

*Costs are estimates based on Chino Valley area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Chino Valley, AZ

Tertiary lake sediments and volcanic ash deposits in the Little Chino Valley; shallow alluvial wells are common near creek drainages

The average residential well in Chino Valley is 280 feet deep and costs approximately $12,600 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $30 to $68 per foot, which is 68% above the national average of $7,500.

The primary aquifer serving the Chino Valley area is the Little Chino Valley Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Yavapai County; ADWR permit; $150; Prescott AMA restrictions on new exempt wells

See our full Arizona well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Chino Valley

Compare prices from licensed AZ well drillers near you.

Well Drillers in Chino Valley, AZ

We're expanding our directory of licensed well drillers in Chino Valley. Get matched with local pros instantly by requesting free quotes below.

Chino Valley Well Drilling FAQ

How much does it cost to drill a well in Chino Valley, AZ?
The average cost to drill a residential water well in Chino Valley is $12,600, based on a typical depth of 280 feet. Drilling rates in the Chino Valley area range from $30 to $68 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Chino Valley?
The average residential well depth in Chino Valley is 280 feet. Actual depth depends on your specific property location, elevation, and proximity to the Little Chino Valley Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Chino Valley?
Yavapai County; ADWR permit; $150; Prescott AMA restrictions on new exempt wells For detailed Arizona permit requirements, licensing rules, and water rights information, see our full Arizona well drilling cost guide.
How long does it take to drill a well in Chino Valley?
Most residential wells in the Chino Valley area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Prescott , Prescott Valley , Paulden, Williamson Valley, Del Rio Springs

Get Free Quotes in Chino Valley

Compare up to 3 competitive quotes from licensed well drillers in the Chino Valley, AZ area. Free, no-obligation estimates.

  • Licensed & insured AZ well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Chino Valley

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Chino Valley well drillers today.