Local 2026 Pricing · DeKalb, IL

DeKalb, IL Well Drilling Cost

Avg. Depth

160 ft

Cost / Foot

$22–$52

Total Project

$5,760

vs. National Avg

23% below avg.

the $7,500 national avg.

DeKalb, IL Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,200–$5,200 $7,000–$10,000 $8,400
150 ft $3,300–$7,800 $8,500–$13,000 $10,600
200 ft $4,400–$10,400 $10,000–$16,000 $12,800
300 ft $6,600–$15,600 $13,000–$22,000 $17,200
400 ft $8,800–$20,800 $16,000–$28,000 $21,600
500 ft $11,000–$26,000 $19,000–$34,000 $26,000

*Costs are estimates based on DeKalb area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in DeKalb, IL

Northern Illinois till plain with Wisconsinan glacial deposits; shallow sand and gravel lenses above Silurian dolomite bedrock

The average residential well in DeKalb is 160 feet deep and costs approximately $5,760 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $22 to $52 per foot, which is 23% below the national average of $7,500.

The primary aquifer serving the DeKalb area is the Troy Bedrock Valley / Shallow Glacial Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

DeKalb County well permit; Illinois EPA; $50-$100

See our full Illinois well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in DeKalb

Compare prices from licensed IL well drillers near you.

Well Drillers in DeKalb, IL

We're expanding our directory of licensed well drillers in DeKalb. Get matched with local pros instantly by requesting free quotes below.

DeKalb Well Drilling FAQ

How much does it cost to drill a well in DeKalb, IL?
The average cost to drill a residential water well in DeKalb is $5,760, based on a typical depth of 160 feet. Drilling rates in the DeKalb area range from $22 to $52 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in DeKalb?
The average residential well depth in DeKalb is 160 feet. Actual depth depends on your specific property location, elevation, and proximity to the Troy Bedrock Valley / Shallow Glacial Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near DeKalb?
DeKalb County well permit; Illinois EPA; $50-$100 For detailed Illinois permit requirements, licensing rules, and water rights information, see our full Illinois well drilling cost guide.
How long does it take to drill a well in DeKalb?
Most residential wells in the DeKalb area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Sycamore, Genoa, Cortland, Shabbona, Malta

Get Free Quotes in DeKalb

Compare up to 3 competitive quotes from licensed well drillers in the DeKalb, IL area. Free, no-obligation estimates.

  • Licensed & insured IL well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in DeKalb

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top DeKalb well drillers today.