Local 2026 Pricing · Dothan, AL

Dothan, AL Well Drilling Cost

Avg. Depth

90 ft

Cost / Foot

$22–$50

Total Project

$3,060

vs. National Avg

59% below avg.

the $7,500 national avg.

Dothan, AL Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,200–$5,000 $7,000–$9,800 $8,200
150 ft $3,300–$7,500 $8,500–$12,700 $10,300
200 ft $4,400–$10,000 $10,000–$15,600 $12,400
300 ft $6,600–$15,000 $13,000–$21,400 $16,600
400 ft $8,800–$20,000 $16,000–$27,200 $20,800
500 ft $11,000–$25,000 $19,000–$33,000 $25,000

*Costs are estimates based on Dothan area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Dothan, AL

Coastal Plain sand and clay sequences with productive Nanafalia and Clayton formations; generally easy drilling through unconsolidated sediments

The average residential well in Dothan is 90 feet deep and costs approximately $3,060 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $22 to $50 per foot, which is 59% below the national average of $7,500.

The primary aquifer serving the Dothan area is the Southeast Alabama Coastal Plain Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Houston County health department permit; $50-$75 fee

See our full Alabama well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Dothan

Compare prices from licensed AL well drillers near you.

Well Drillers in Dothan, AL

We're expanding our directory of licensed well drillers in Dothan. Get matched with local pros instantly by requesting free quotes below.

Dothan Well Drilling FAQ

How much does it cost to drill a well in Dothan, AL?
The average cost to drill a residential water well in Dothan is $3,060, based on a typical depth of 90 feet. Drilling rates in the Dothan area range from $22 to $50 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Dothan?
The average residential well depth in Dothan is 90 feet. Actual depth depends on your specific property location, elevation, and proximity to the Southeast Alabama Coastal Plain Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Dothan?
Houston County health department permit; $50-$75 fee For detailed Alabama permit requirements, licensing rules, and water rights information, see our full Alabama well drilling cost guide.
How long does it take to drill a well in Dothan?
Most residential wells in the Dothan area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Enterprise, Ozark, Daleville, Headland, Midland City

Get Free Quotes in Dothan

Compare up to 3 competitive quotes from licensed well drillers in the Dothan, AL area. Free, no-obligation estimates.

  • Licensed & insured AL well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Dothan

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Dothan well drillers today.