Local 2026 Pricing · Dripping Springs, TX

Dripping Springs, TX Well Drilling Cost

Avg. Depth

320 ft

Cost / Foot

$28–$65

Total Project

$14,080

vs. National Avg

88% above avg.

the $7,500 national avg.

Dripping Springs, TX Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,800–$6,500 $7,600–$11,300 $9,200
150 ft $4,200–$9,750 $9,400–$14,950 $11,800
200 ft $5,600–$13,000 $11,200–$18,600 $14,400
300 ft $8,400–$19,500 $14,800–$25,900 $19,600
400 ft $11,200–$26,000 $18,400–$33,200 $24,800
500 ft $14,000–$32,500 $22,000–$40,500 $30,000

*Costs are estimates based on Dripping Springs area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Dripping Springs, TX

Hays County Hill Country with Lower Cretaceous Glen Rose Formation; fractured limestone with cave systems; well depths highly variable over short distances

The average residential well in Dripping Springs is 320 feet deep and costs approximately $14,080 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $28 to $65 per foot, which is 88% above the national average of $7,500.

The primary aquifer serving the Dripping Springs area is the Trinity / Middle Trinity Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Hays County; Hays Trinity GCD permit required; $200-$400; actively managed groundwater area

See our full Texas well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Dripping Springs

Compare prices from licensed TX well drillers near you.

Well Drillers in Dripping Springs, TX

We're expanding our directory of licensed well drillers in Dripping Springs. Get matched with local pros instantly by requesting free quotes below.

Dripping Springs Well Drilling FAQ

How much does it cost to drill a well in Dripping Springs, TX?
The average cost to drill a residential water well in Dripping Springs is $14,080, based on a typical depth of 320 feet. Drilling rates in the Dripping Springs area range from $28 to $65 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Dripping Springs?
The average residential well depth in Dripping Springs is 320 feet. Actual depth depends on your specific property location, elevation, and proximity to the Trinity / Middle Trinity Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Dripping Springs?
Hays County; Hays Trinity GCD permit required; $200-$400; actively managed groundwater area For detailed Texas permit requirements, licensing rules, and water rights information, see our full Texas well drilling cost guide.
How long does it take to drill a well in Dripping Springs?
Most residential wells in the Dripping Springs area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Wimberley , Driftwood, Austin , Buda , Kyle

Get Free Quotes in Dripping Springs

Compare up to 3 competitive quotes from licensed well drillers in the Dripping Springs, TX area. Free, no-obligation estimates.

  • Licensed & insured TX well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Dripping Springs

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Dripping Springs well drillers today.