Local 2026 Pricing · Edgewood, NM

Edgewood, NM Well Drilling Cost

Avg. Depth

380 ft

Cost / Foot

$30–$68

Total Project

$17,480

vs. National Avg

133% above avg.

the $7,500 national avg.

Edgewood, NM Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $3,000–$6,800 $7,800–$11,600 $9,400
150 ft $4,500–$10,200 $9,700–$15,400 $12,100
200 ft $6,000–$13,600 $11,600–$19,200 $14,800
300 ft $9,000–$20,400 $15,400–$26,800 $20,200
400 ft $12,000–$27,200 $19,200–$34,400 $25,600
500 ft $15,000–$34,000 $23,000–$42,000 $31,000

*Costs are estimates based on Edgewood area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Edgewood, NM

Estancia Basin with Madera Group limestone and Abo/Yeso Formations; east side of Sandia Mountains with limited recharge area

The average residential well in Edgewood is 380 feet deep and costs approximately $17,480 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $30 to $68 per foot, which is 133% above the national average of $7,500.

The primary aquifer serving the Edgewood area is the Estancia Basin / Madera Limestone Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Santa Fe County well permit; NM OSE; $200-$400; declared basin with restricted new appropriations

See our full New Mexico well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Edgewood

Compare prices from licensed NM well drillers near you.

Well Drillers in Edgewood, NM

We're expanding our directory of licensed well drillers in Edgewood. Get matched with local pros instantly by requesting free quotes below.

Edgewood Well Drilling FAQ

How much does it cost to drill a well in Edgewood, NM?
The average cost to drill a residential water well in Edgewood is $17,480, based on a typical depth of 380 feet. Drilling rates in the Edgewood area range from $30 to $68 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Edgewood?
The average residential well depth in Edgewood is 380 feet. Actual depth depends on your specific property location, elevation, and proximity to the Estancia Basin / Madera Limestone Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Edgewood?
Santa Fe County well permit; NM OSE; $200-$400; declared basin with restricted new appropriations For detailed New Mexico permit requirements, licensing rules, and water rights information, see our full New Mexico well drilling cost guide.
How long does it take to drill a well in Edgewood?
Most residential wells in the Edgewood area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Moriarty , Sandia Park, Tijeras , Chilili, Cedro

Get Free Quotes in Edgewood

Compare up to 3 competitive quotes from licensed well drillers in the Edgewood, NM area. Free, no-obligation estimates.

  • Licensed & insured NM well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Edgewood

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Edgewood well drillers today.