Local 2026 Pricing · Falmouth, MA

Falmouth, MA Well Drilling Cost

Avg. Depth

80 ft

Cost / Foot

$32–$74

Total Project

$4,000

vs. National Avg

47% below avg.

the $7,500 national avg.

Falmouth, MA Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $3,200–$7,400 $8,000–$12,200 $9,800
150 ft $4,800–$11,100 $10,000–$16,300 $12,700
200 ft $6,400–$14,800 $12,000–$20,400 $15,600
300 ft $9,600–$22,200 $16,000–$28,600 $21,400
400 ft $12,800–$29,600 $20,000–$36,800 $27,200
500 ft $16,000–$37,000 $24,000–$45,000 $33,000

*Costs are estimates based on Falmouth area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Falmouth, MA

Upper Cape Cod glacial outwash and moraine; sandy glacial deposits create highly productive unconfined aquifer; sole source aquifer designation

The average residential well in Falmouth is 80 feet deep and costs approximately $4,000 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $32 to $74 per foot, which is 47% below the national average of $7,500.

The primary aquifer serving the Falmouth area is the Cape Cod Aquifer (EPA Sole Source). Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Falmouth Board of Health well permit; MA DEP; $100-$200; strict water quality protections for sole source aquifer

See our full Massachusetts well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Falmouth

Compare prices from licensed MA well drillers near you.

Well Drillers in Falmouth, MA

We're expanding our directory of licensed well drillers in Falmouth. Get matched with local pros instantly by requesting free quotes below.

Falmouth Well Drilling FAQ

How much does it cost to drill a well in Falmouth, MA?
The average cost to drill a residential water well in Falmouth is $4,000, based on a typical depth of 80 feet. Drilling rates in the Falmouth area range from $32 to $74 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Falmouth?
The average residential well depth in Falmouth is 80 feet. Actual depth depends on your specific property location, elevation, and proximity to the Cape Cod Aquifer (EPA Sole Source). A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Falmouth?
Falmouth Board of Health well permit; MA DEP; $100-$200; strict water quality protections for sole source aquifer For detailed Massachusetts permit requirements, licensing rules, and water rights information, see our full Massachusetts well drilling cost guide.
How long does it take to drill a well in Falmouth?
Most residential wells in the Falmouth area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Mashpee, Bourne, Sandwich, Woods Hole, East Falmouth

Get Free Quotes in Falmouth

Compare up to 3 competitive quotes from licensed well drillers in the Falmouth, MA area. Free, no-obligation estimates.

  • Licensed & insured MA well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Falmouth

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Falmouth well drillers today.