Local 2026 Pricing · Georgetown, KY

Georgetown, KY Well Drilling Cost

Avg. Depth

130 ft

Cost / Foot

$22–$50

Total Project

$4,420

vs. National Avg

41% below avg.

the $7,500 national avg.

Georgetown, KY Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,200–$5,000 $7,000–$9,800 $8,200
150 ft $3,300–$7,500 $8,500–$12,700 $10,300
200 ft $4,400–$10,000 $10,000–$15,600 $12,400
300 ft $6,600–$15,000 $13,000–$21,400 $16,600
400 ft $8,800–$20,000 $16,000–$27,200 $20,800
500 ft $11,000–$25,000 $19,000–$33,000 $25,000

*Costs are estimates based on Georgetown area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Georgetown, KY

Inner Bluegrass karst terrain with Ordovician Lexington Limestone; Royal Spring aquifer system feeds one of the largest springs in Kentucky

The average residential well in Georgetown is 130 feet deep and costs approximately $4,420 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $22 to $50 per foot, which is 41% below the national average of $7,500.

The primary aquifer serving the Georgetown area is the Inner Bluegrass / Royal Spring Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Scott County well permit; Kentucky Division of Water; $50

See our full Kentucky well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Georgetown

Compare prices from licensed KY well drillers near you.

Well Drillers in Georgetown, KY

We're expanding our directory of licensed well drillers in Georgetown. Get matched with local pros instantly by requesting free quotes below.

Georgetown Well Drilling FAQ

How much does it cost to drill a well in Georgetown, KY?
The average cost to drill a residential water well in Georgetown is $4,420, based on a typical depth of 130 feet. Drilling rates in the Georgetown area range from $22 to $50 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Georgetown?
The average residential well depth in Georgetown is 130 feet. Actual depth depends on your specific property location, elevation, and proximity to the Inner Bluegrass / Royal Spring Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Georgetown?
Scott County well permit; Kentucky Division of Water; $50 For detailed Kentucky permit requirements, licensing rules, and water rights information, see our full Kentucky well drilling cost guide.
How long does it take to drill a well in Georgetown?
Most residential wells in the Georgetown area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Sadieville, Stamping Ground, Great Crossings, Midway, Versailles

Get Free Quotes in Georgetown

Compare up to 3 competitive quotes from licensed well drillers in the Georgetown, KY area. Free, no-obligation estimates.

  • Licensed & insured KY well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Georgetown

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Georgetown well drillers today.