Local 2026 Pricing · Lexington, KY

Lexington, KY Well Drilling Cost

Avg. Depth

120 ft

Cost / Foot

$24–$54

Total Project

$4,320

vs. National Avg

42% below avg.

the $7,500 national avg.

Lexington, KY Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,400–$5,400 $7,200–$10,200 $8,400
150 ft $3,600–$8,100 $8,800–$13,300 $10,600
200 ft $4,800–$10,800 $10,400–$16,400 $12,800
300 ft $7,200–$16,200 $13,600–$22,600 $17,200
400 ft $9,600–$21,600 $16,800–$28,800 $21,600
500 ft $12,000–$27,000 $20,000–$35,000 $26,000

*Costs are estimates based on Lexington area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Lexington, KY

Inner Bluegrass with Ordovician Lexington and Cynthiana Limestones; phosphatic limestone provides productive but hard water

The average residential well in Lexington is 120 feet deep and costs approximately $4,320 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $24 to $54 per foot, which is 42% below the national average of $7,500.

The primary aquifer serving the Lexington area is the Inner Bluegrass / Ordovician Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Fayette County well permit; Kentucky Division of Water; $50; mostly municipal water, wells on rural outskirts

See our full Kentucky well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Lexington

Compare prices from licensed KY well drillers near you.

Well Drillers in Lexington, KY

We're expanding our directory of licensed well drillers in Lexington. Get matched with local pros instantly by requesting free quotes below.

Lexington Well Drilling FAQ

How much does it cost to drill a well in Lexington, KY?
The average cost to drill a residential water well in Lexington is $4,320, based on a typical depth of 120 feet. Drilling rates in the Lexington area range from $24 to $54 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Lexington?
The average residential well depth in Lexington is 120 feet. Actual depth depends on your specific property location, elevation, and proximity to the Inner Bluegrass / Ordovician Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Lexington?
Fayette County well permit; Kentucky Division of Water; $50; mostly municipal water, wells on rural outskirts For detailed Kentucky permit requirements, licensing rules, and water rights information, see our full Kentucky well drilling cost guide.
How long does it take to drill a well in Lexington?
Most residential wells in the Lexington area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Versailles, Nicholasville, Georgetown , Paris, Winchester

Get Free Quotes in Lexington

Compare up to 3 competitive quotes from licensed well drillers in the Lexington, KY area. Free, no-obligation estimates.

  • Licensed & insured KY well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Lexington

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Lexington well drillers today.