Local 2026 Pricing · Logan, UT

Logan, UT Well Drilling Cost

Avg. Depth

180 ft

Cost / Foot

$24–$56

Total Project

$6,840

vs. National Avg

9% below avg.

the $7,500 national avg.

Logan, UT Well Drilling Cost by Depth

Well Depth Drilling Only Complete System Est. Total
100 ft $2,400–$5,600 $7,200–$10,400 $8,600
150 ft $3,600–$8,400 $8,800–$13,600 $10,900
200 ft $4,800–$11,200 $10,400–$16,800 $13,200
300 ft $7,200–$16,800 $13,600–$23,200 $17,800
400 ft $9,600–$22,400 $16,800–$29,600 $22,400
500 ft $12,000–$28,000 $20,000–$36,000 $27,000

*Costs are estimates based on Logan area rates for 2026. Complete system includes casing, pump, pressure tank, electrical, and permits. Actual prices vary by property.

Well Drilling in Logan, UT

Cache Valley with thick Quaternary basin fill from Bear River Range erosion; productive alluvial aquifer fed by mountain snowmelt

The average residential well in Logan is 180 feet deep and costs approximately $6,840 for a complete system including drilling, casing, pump, and pressure tank. Drilling rates in the area range from $24 to $56 per foot, which is 9% below the national average of $7,500.

The primary aquifer serving the Logan area is the Cache Valley Basin Fill Aquifer. Well depths can vary significantly depending on your specific property location and proximity to the aquifer.

Permits & Regulations

Cache County well permit; UT Division of Water Rights; $100-$200; well-managed basin with good monitoring

See our full Utah well drilling cost guide for permit requirements and water quality details

Get Free Well Drilling Quotes in Logan

Compare prices from licensed UT well drillers near you.

Well Drillers in Logan, UT

We're expanding our directory of licensed well drillers in Logan. Get matched with local pros instantly by requesting free quotes below.

Logan Well Drilling FAQ

How much does it cost to drill a well in Logan, UT?
The average cost to drill a residential water well in Logan is $6,840, based on a typical depth of 180 feet. Drilling rates in the Logan area range from $24 to $56 per foot. Total project cost includes drilling, casing, pump installation, pressure tank, electrical hookup, and water testing.
How deep are wells in Logan?
The average residential well depth in Logan is 180 feet. Actual depth depends on your specific property location, elevation, and proximity to the Cache Valley Basin Fill Aquifer. A local well driller can estimate the depth needed for your property based on nearby well logs and geological data.
Do I need a permit to drill a well near Logan?
Cache County well permit; UT Division of Water Rights; $100-$200; well-managed basin with good monitoring For detailed Utah permit requirements, licensing rules, and water rights information, see our full Utah well drilling cost guide.
How long does it take to drill a well in Logan?
Most residential wells in the Logan area take 1–3 days to drill, depending on depth and local geology. The complete project — including pump installation, electrical hookup, water testing, and permitting — typically takes 1–2 weeks from start to finish. Scheduling availability with local drillers may add additional lead time.

Nearby Areas

Also serving: Smithfield, Providence, North Logan, River Heights, Hyde Park

Get Free Quotes in Logan

Compare up to 3 competitive quotes from licensed well drillers in the Logan, UT area. Free, no-obligation estimates.

  • Licensed & insured UT well drillers
  • Matched to your area & property
  • Compare prices before you commit

Get Free Well Drilling Quotes in Logan

100% free · No obligation · Licensed & insured pros

Your information is secure and never shared with third parties

Ready to Get Started?

Get matched with top Logan well drillers today.